OVHcloud

How to accept an OVH contact change request for your server

After payment we send OVH a request to transfer the server to your account. You need to confirm it: with the link in the OVH email or with the code in the OVHcloud panel.

  • Time: 5 minutes
  • Level: Easy

In short

  • Put the NIC-handle of your OVH account (like ab12345-ovh) in the server request or send it in the order ticket. The account password is not needed.
  • We send OVH a request to change the server’s contacts, and OVH emails a validation code to your account’s address.
  • Accept the request with the link in the email or in My accountService contactsMy requests → Accept request; the code goes into the Validation code field. There may be several requests: for the server and for IP addresses.
  • A few minutes after you confirm, the server appears in Bare Metal CloudDedicated servers.
Contents
  1. How the transfer works
  2. How to accept the server in five steps
  3. How to check that the server is yours
  4. If OVH rejected the request or it cannot be confirmed
  5. FAQ

You will need

  • An OVH account in the EU zone and the Ireland (IE) subsidiary, with a complete profile and a confirmed email: how to create an OVH account.
  • Access to this account’s email: the code is sent there.
  • A paid order for an OVH server: how ordering works.

How the transfer works

Every OVH service has three contacts: administrative, technical and billing (Billing contact). Transferring a server means changing its contacts: your account becomes the contact that manages the server, while ours stays the billing contact. That is why we pay OVH for the server and renew it (clause 3.3.1 of the offer).

Every account the contact change affects has to confirm it, including yours. Until you confirm the request, the server stays with us and does not appear in your panel. An OVH VPS is transferred the same way.

You can only accept the server on an account in the OVHcloud EU zone and the Ireland (IE) subsidiary, where ours is: OVH does not change contacts between subsidiaries or zones. How to create such an account is covered in the guide to OVH registration.

OVH’s newer guides call the panel the OVHcloud Console, older ones the OVHcloud Control Panel. The buttons below are named as they appear in its English interface.

How to accept the server in five steps

  1. Put the NIC-handle in the request or the order ticket

    You give the NIC-handle in the server request (the OVH account (NIC-handle) field of the order window) or in a separate message in the order ticket after payment (clause 3.3). It looks like ab12345-ovh and is shown in the panel under your email address, in the menu behind your initials at the top right. Copy it from there so you do not get a character wrong.

    An email address, order number or password will not work instead of the NIC-handle. Never send your OVH account password at all.

  2. Wait for the OVH email with the code

    When we send the request, we let you know in the ticket. OVH emails your account’s contact address with a link and a personal one-time validation code. Each party to the request gets its own code.

    No email? Check your spam folder. If it is not there either, check which contact email is set in your profile: My accountSecurity and login.

  3. Accept the request with the link or in the panel

    The easiest way is the link in the email: it opens the request in the panel and fills in the code. If the panel asks you to sign in, sign in to the account the server is being transferred to, and accept the request.

    To do it manually, open My accountService contactsMy requests, find the request with the status Pending validation, click ⋮ in the Actions column and choose Accept request. Paste the code from the email into the Validation code field and confirm. The Refuse request option next to it rejects the request.

  4. Accept every request

    The server and its additional IP addresses may come as separate requests. Check whether My requests still has other requests with the status Pending validation, and accept them all: a service whose request you have not accepted does not move to you.

  5. Find the server in your panel

    The contact change is applied a few minutes after every party has confirmed it. Open Bare Metal CloudDedicated servers: the server is in the list. A VPS is not in this list; it appears in the VPS section of the panel.

Confirm the request as soon as the email arrives: it is valid for a limited time, and the time until you confirm adds to the server delivery time. If the request has expired or the email got lost, write in the ticket and we will send the request again.

How to check that the server is yours

The server is listed in Bare Metal CloudDedicated servers, and its page opens. In My accountService contactsMy services, the server’s contact columns show your NIC-handle, with our account as the billing contact.

When the transfer is complete, we tell you in the ticket and send the server login details. Next: how to log in to an OVH server and how to reboot and reinstall it in the panel.

If OVH rejected the request or it cannot be confirmed

What OVH says or what you seeWhyWhat to do
“… is not valid for type AccountId”OVH does not accept this NIC-handle: it has a typo, the registration was not finished, the profile is missing details or the email is not confirmedCopy the NIC-handle from the account menu, complete your profile and confirm your email. Then send the NIC-handle in the ticket again.
“contacts should remain in the same subsidiary”Your account is not in the Ireland (IE) OVH subsidiary, where ours isAn account’s subsidiary cannot be changed. Create a new account in the IE subsidiary with the same personal details and a different email address (how to do it), and send its NIC-handle in the ticket.
The account was created in the OVH zone for Canada or the USContacts can only be changed between accounts in the same OVH geographic zoneA European server cannot be transferred to such an account. You need a new account in the EU zone and the IE subsidiary, with the same personal details and a different email address.
OVH does not process the contact change because of unpaid invoicesYour account or ours has unpaid invoicesIf your account has unpaid invoices for your own orders, pay them. If not, write in the ticket: we will sort it out on our side.
The email with the code did not arriveThe email is in spam or went to a different contact addressCheck your spam folder and the email in Security and login. If the request’s ⋮ menu has Re-send request, click it: a new code arrives. If there is no such option or it did not help, ask in the ticket for the request to be sent again.
The request is not in My requests, or the code does not workThe request has expired, or you are signed in to a different accountCompare the NIC-handle in the menu with the one you sent us. If it is the same, ask in the ticket for the request to be sent again: a new code will arrive.
Everything is confirmed, but the server is not in the listThe change is still being applied, or a request is still unconfirmedWait a few minutes and check My requests. If the server still does not appear, write in the ticket.

If the server cannot be accepted on this account at all, within 14 days we help transfer it to another OVH account you name. The payment for the server is not refunded in this case (clause 3.3 of the offer). So it is best to create and verify the account before you pay: how to create an OVH account.

OVH covers contacts and requests in more detail in its guide Managing contacts for your services.

FAQ

What changes in my account after the transfer?
The server appears in Dedicated servers, and you can reboot it, reinstall the system, and turn on rescue mode and the KVM console (IPMI). Payment and renewal stay with us: what to do with OVH emails about the term.
How long do I wait after confirming?
OVH applies the contact change a few minutes after every party has confirmed it. Then we send you the server login details in the ticket.
I received a contact change request we did not agree on. What should I do?
Do not accept it, and ask us in a ticket. A request you accept changes who manages the server and who pays for it.
Can I send my email address instead of the NIC-handle?
No, we need a NIC-handle like ab12345-ovh: it is shown in the initials menu of the OVHcloud panel. If only an email address is shown there, the account was most likely created outside the EU zone, and the server cannot be transferred to it: you need a new account in the IE subsidiary.

Did this guide help?

Questions?