OVHcloud

How to reboot and reinstall an OVH dedicated server

You can reboot an OVH server and reinstall its system yourself, on the server page in the OVHcloud panel. A reboot takes a few minutes, and a reinstall erases all data on the disks.

  • Time: 10 minutes
  • Level: Easy

In short

  • The server is in Bare Metal CloudDedicated serversyour serverGeneral information.
  • Reboot: in the Service status block, click “...” next to Status → Restart → Confirm. This is a hard reboot, so if the system responds, sudo reboot is better.
  • Reinstall: “...” next to the operating system → Reinstall my server → the OS → Confirm. All data on the disks is erased.
  • Server not in the list? Check that you are signed in to the account whose NIC-handle you sent us and that you accepted the transfer: how to accept the server.
Contents
  1. Where to find the server in the OVHcloud panel
  2. How to reboot the server
  3. How to reinstall the operating system
  4. How to check that it worked
  5. If it did not work
  6. FAQ

You will need

  • Access to the OVHcloud panel with the account the server was transferred to.
  • For a reinstall: a copy of all the data you need and your public SSH key.

Where to find the server in the OVHcloud panel

A server on your OVH account is rebooted and reinstalled in the OVHcloud panel. OVH’s newer guides call it the OVHcloud Console, older ones the OVHcloud Control Panel. The buttons below are named as they appear in its English interface.

Open Bare Metal CloudDedicated servers and choose the server: its General information tab opens. Kimsufi, So you Start and Rise servers are in the same section. This guide is for dedicated servers: an OVH VPS has its buttons on a different page, and we do not cover them here.

If the server is not in the list, check that you are signed in to the account whose NIC-handle you sent us, and that you accepted the transfer request. Some internet providers in some countries restrict access to provider websites: if the OVH panel does not open for you, ask us for the reboot or reinstall in a ticket or on Telegram.

How to reboot the server

If you can log in to the server, reboot it from the system: OVH recommends this too. On Linux the command is:

sudo reboot

If the server is frozen and will not let you in, reboot it from the panel. This is a hard reboot, like switching the power off and on.

Unsaved data is lost. Programs on the server do not get a chance to shut down, so keep the hard reboot for when the server does not respond.

  1. Open the server page

    Go to Bare Metal CloudDedicated serversyour serverGeneral information.

  2. Click Restart in the Service status block

    In the Service status block, click “...” next to Status and choose Restart.

  3. Confirm the reboot

    Click Confirm. The reboot takes a few minutes, and you can follow it in the Tasks tab on the server page.

A few minutes after the task in Tasks has finished, connect to the server over SSH or RDP. If it still does not respond, open its screen in the KVM console (IPMI) to see where the boot stopped, or work through the checklist in “Server not responding”.

How to reinstall the operating system

A reinstall erases all data on the disks the system is installed to. It cannot be recovered afterwards. Copy what you need in advance. If the system no longer boots, you can get the files out through rescue mode.

For Windows and Plesk, the wizard requires a paid license. Do not order one in OVH for a server from us: the offer does not allow paid options for it at our expense (clause 3.3.1). If you need Windows, write to us in a ticket.

  1. Open the operating system menu

    On the General information tab, click “...” next to the operating system and choose Reinstall my server. If no system is installed on the server, the item is called Install my server.

  2. Choose the OS type and the system

    Choose the operating system type, then the system itself and its version.

    If you need your own disk layout, tick Customise the partition configuration before you click Next. That is where you set the number of disks, RAID and partitions. Without the tick, OVH builds RAID 1 on a server with several disks. Windows is installed on no more than 2 disks.

  3. Add an SSH key on the summary page

    On the last page, the wizard shows what you chose and the settings of the specific OS. Paste your public key into the Your Public SSH key field, or choose a saved one in SSH key to pre-install. Key login then works right after installation. No key yet? How to create one.

  4. Click Confirm

    OVH then starts the installation, and the data on the disks can no longer be saved.

  5. Wait for the email with login details

    OVH does not say how long installation takes. When the system is installed, the login details arrive by email at your OVH account’s address. On Linux, login is open to a user named after the system, such as ubuntu, and root is disabled: how to log in and get root privileges. On Windows, you log in over RDP.

The server name (hostname) and a post-installation script cannot be set in the wizard: OVH has kept them only in the API, CLI and Terraform.

What happened to personal installation templates

In 2025 OVH withdrew personal installation templates. The “Install one of your templates” option disappeared from the wizard in mid-April; from June 17, templates could no longer be created or edited; and on October 7, 2025 they were deleted along with their data. As a replacement, OVH offers reinstallation through the API: POST /dedicated/server/{serviceName}/reinstall (OVH announcement).

How to check that it worked

After a reboot, the server responds over SSH or RDP as before. After a reinstall, you can log in with the details from the new OVH email, and General information shows the new system.

On the first connection after a reinstall, your SSH client warns that the server key has changed: the new system has a new key. Remove the old entry on your computer and connect again:

ssh-keygen -R 203.0.113.10

If it did not work

What you seeWhat to do
The server is not in Dedicated serversCheck the account’s NIC-handle and accept the transfer request: how to accept the server.
WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!This is expected after a reinstall. Run ssh-keygen -R with the server’s IP, as shown above, or see this error explained.
After the reboot, the server booted into rescue modeThe boot settings are still set to rescue mode. Switch back to Boot from the hard disk: how to leave rescue mode.
The server does not respond after the rebootLook at the screen in the KVM console (IPMI). If the cause is unclear, write in a ticket: what you did and when.
The email with login details did not arriveCheck your spam folder and the contact email in My accountSecurity and login.
The wizard has no “Install one of your templates” optionOVH withdrew personal templates in 2025; see the section above.
The OVH panel does not openSome internet providers in some countries restrict access to provider websites. Ask us for the reboot or reinstall in a ticket or on Telegram.

OVH describes the server page in more detail in its guide Getting started with a dedicated server.

FAQ

Does a reboot erase data?
No, the data on the disks stays. A hard reboot loses only what programs had not yet written to disk.
How long does a reinstall take?
OVH does not give a time. The sign that it is done is the OVH email with login details, and you can follow the tasks in the Tasks tab on the server page.
Can I reinstall the system and keep my files?
No, a reinstall erases the disks. Copy the files first, and if the system does not boot, do it from rescue mode.
Can I install Windows?
Windows needs a paid license, and you may not buy it in OVH for a server from us. Write to us in a ticket, and read about Windows versions in Windows on a dedicated server.

Did this guide help?

Questions?